Filter
Top Products
84
Copy the range marked “End” as follows:
- Move to the start of the range you want to copy and press the
button. Then press the
(red) button
to set the start point marker of the range to be copied. Then press the
!
(green) button to automatically
mark the full range to the end of the recording
Copy the complete recording as follows:
- Press the
!
(green) button twice to select the complete recording
Press the
(red) button to copy the selected range (the selection will be darkened on-screen) or press
the
!
(green) button to reset the markers.
The UFC 861 then internally duplicates the selected recording range as a new recording. When the copy
operation is complete the recording list appears. The copy is indicated by a “C:” in front of the name.
RECORDING LIST
You can use this function, for example, to remove commercial breaks from your recorded programmes.
Make sure you have also selected “Cut” with the
(red) button.
Use the
buttons to select the recording you want to cut and press the
button. The following
display appears (example):
CUT
The removed portion of a recording cannot be recovered! For security, make a
backup copy of the recording before cutting it for the fi rst time, so that if necessary
you will be able to recover it (see “Copy”).
Also note the bars
at the bottom of the
on-screen display!
These provide
information on
what to do next.