Filter
Top Products
50
CAUTION!
Download software version: VX.X
Download software version: VX.X
Continue?
OK = YES EX = NO
f) Press the
button to perform a version check. If there
is an older version on the data carousel, a message
appears telling you so. You can abort the download
prematurely if necessary.
This information is determined by the CAM, or the
Smartcard and does not originate from the receiver.
Note: Depending on the load on the data carousel, the
load operation may take as long as an hour!
g) Save the downloaded data.
You must not switch the unit off during this phase!
Installation
a) Start the software download from the “INSTALLATION”
menu after selecting the “Download” menu (6) by
pressing the
button. The download then runs
through a number of phases, with each phase
accompanied by relevant information messages. You
can abort the various phases at any time.
b) Search for the download channel on the ASTRA
satellite. This search is performed the fi rst time the
unit is operated and may take a few minutes. When
the unit is restarted the saved download channel is set
directly.
c) Load the receiver identifi er. This operation may also
take several minutes.
d) You can select data from the data carousel, depending
on availability (operating system/channel lists).
e) After choosing option 1 “Receiver software”, the
following menu is displayed: