Filter
Top Products
21
Transponder:
Press the
buttons to scroll through the
transponders of the satellite highlighted in yellow
at the top of the display. At the right you will see
the signal strength of the transponder on the two
tuners, enabling you to check that the satellite
confi guration you just set up is OK.
When you have fi nished confi guring the satellite,
press the
!
(green) button.
If in the preceding “Select Satellite” menu you
selected more than one satellite, you will now
see the confi guration for the next of the satellites
you selected. Confi gure the satellite as described
above.
When you have fi nished confi guring the satellite,
press the
!
(green) button. The receiver then
automatically calls up the selection menu for the
channel search.
Transponder:
Press the
buttons to scroll through the
transponders of the satellite highlighted in yellow
at the top of the display. At the right you will see
the signal strength of the transponder on the two
tuners, enabling you to check that the satellite
confi guration you just set up is OK.
When you have fi nished confi guring the satellite,
press the
!
(green) button.
If in the preceding “Select Satellite” menu you
selected more than one satellite, you will now
see the confi guration for the next of the satellites
you selected. Confi gure the satellite as described
above.
When you have confi gured all the satellites you
previously selected for tuner 1, you see the
satellite confi guration display for the second tuner
(see example screenshot):
Confi gure the satellites for the second tuner in the
same way as for tuner 1.
When you have fi nished confi guring the satellite,
press the
!
(green) button. The receiver then
automatically calls up the selection menu for the
channel search.
FIRST INSTALLATION
The notes on First installation are unifi ed once again from this point!
Continue First installation as described on page 25.