Filter
Top Products
97
Copy the range marked “End” as follows:
- Move to the start of the range you want to copy and press the
button. Then press the
!
(red) button
to set the start point marker of the range to be copied. Then press the
!
(green) button to automatically
mark the full range to the end of the recording.
Copy the complete recording as follows:
- Press the
!
(green) button twice to select the complete recording.
Press the
(red) button to copy the selected range (the selection will be darkened on-screen) or press
the
!
(green) button to reset the markers.
The UFS 822 then internally duplicates the selected recording range as a new recording. When
the copy operation is complete the recording list appears. The copy is indicated by a “C:” in front of
the name.
RECORDING LIST
You can use this function, for example, to remove ad breaks from your recorded programmes.
Make sure you have also selected “Cut” with the
(red) button.
Use the
to select the recording you want to cut, then press the
button. The following
display appears (example):
CUT
The removed portion of a recording cannot be recovered! For security, make
a backup copy of the recording before cutting it for the fi rst time, so that if
necessary you will be able to recover it (see “Copy”).
Also pay attention
to the bars at the
bottom of the on-
screen display!
These provide
information on what to do
next.