Filter
Top Products
84
RECORDING
You can start recording the programme as from the point you switched to the channel in question
simply by pressing the
button, or you can simply wait the 5 seconds for automatic recording
to begin. If you want to alter the end time or recording duration, you can do so as described under
“Duration/End” before pressing
to start recording.
Note: The “Decoding” line is shown only when recording an encrypted channel.
When recording
starts, only the
data of the current
programme is
recorded. The pro-
gramme running
before you switched channels
is not recorded.
Duration/End
You can specify the duration of a recording regardless of when it starts. The receiver automatically
retrieves the end time of the programme you are currently viewing from the EPG data (where available)
and inserts it in the “Duration” fi eld. Otherwise the end time is based on the default duration you set on
the “User Preference” menu under “PVR Setup”. If your programmed recording overlaps with another
scheduled recording, the end time of the current recording is matched to the start time of the one already
scheduled. To change the recording duration, use the
to move to the “Duration” fi eld and use the
to select the time after which you want recording to stop automatically. Press the
"
(yellow) button to
shorten the recording by 10 minutes and the
#
(blue) button to extend it by 10 minutes.
Decoding (only shown when recording an encrypted channel)
Here you can use the
buttons to select whether the programme should be recorded on the hard disk
uncoded (selection “On”) or encrypted (selection “No”).
If you select “On”, there is a possibility that you will not be able to view further encrypted channels decrypted
by the CA module in use. This will depend on the settings in the menu “System setup“ “Common Interface“
“Multiple decoding” (see section “System setup“ “Common Interface”, “Multiple decoding”).
Record path (only if an external USB storage medium has been connected)
If an external USB storage medium has been connected to the UFS 822 rear panel, recordings can be saved
directly to the USB storage medium. Direct recording of encrypted channels on the USB storage medium