Filter
Top Products
58
Timer operation
÷ The reserved contents will be displayed for 2 seconds per item. After
this, the previous display content appears again.
When timer operation is not required
To set the same timer program again
Setting the number of minutes until the unit
is put to standby mode.
Sleep timer
(Remote control only)
Each press of the key switches the TIMER numbers as follows.
TIMER
MODE
Select the TIMER number to be checked.
Press so that all TIMER No. indicators are
OFF
Press so that the desired TIMER No. indica-
tors light.
1 Select the “sleep” icon
1 TIMER 1 ...... (Contents of the timer 1 are displayed.)
2 TIMER 2 ...... (Contents of the timer 2 are displayed.)
3 TIMER 1, 2.. (Contents of the timer 1 and timer 2 are displayed.)
4 Off
To change the reserved contents
Restart the procedure of “Timer programming” from the
beginning.
T
1 TIMER 1 ...... (Only the timer 1 is carried out.)
2 TIMER 2 ...... (Only the timer 2 is carried out.)
3 TIMER 1,2... (Both timers 1 and 2 are carried out.)
4 Off ............... (No timer operation is carried out.)
Each press of the key switches the TIMER numbers as follows.
÷ The reservation contents are held in memory.
Each press of the key switches the TIMER numbers as follows.
1 TIMER 1 ...... (Only the timer 1 is carried out.)
2 TIMER 2 ...... (Only the timer 2 is carried out.)
3 TIMER 1,2... (Both timers 1 and 2 are carried out.)
4 Off ............... (No timer operation is carried out.)
÷ Also prepare the disc or tape and adjust the listening volume.
÷ This unit is turned STANDBY automatically after the set time has
elapsed.
÷ While the SLEEP indicator is lit, the remaining sleep time is displayed
in the Sleep area of the GRC display.
÷ Each press increases the time by 10 minutes. The maximum time that
can be set is 90 minutes.
10=20=30...70=80=90=0=10=20...
To cancel
Turn STANDBY or select “Sleep” icon repeatedly until the
sleep time is cancelled (0).
Main unit
KHz TIMER 1 2
TAPE2/
M
W
W
AUTO SOUND
PRO LOGIC
DIGITA
3 ST
M
MHz SLEEP
DOWN
DIGITA
DTS DOLBY
DIGITA
sLEEP 9
)
Check the reservation content.
TIMER
MODE
TIMER
MODE
Lights up.
Duration for sleep timer.
GRC
2
Set the (ON/STANDBY) switch to STANDBY.
ON/STANDBY
Main unit
Lights in green.
s
l
e
e
p