Filter
Top Products
2.5.2 Programming User-defined Satellites
The TracVision R5/R4 satellite library has two open slots that
you may use to program two user-defined satellites in case you
want to install/watch a satellite that is not in the KVH
predefined satellite library. To configure a user satellite, you will
need to obtain the following satellite information from your
satellite service provider or from sites on the Internet, such as
www.satcodx.com:
• Satellite name
• Satellite position (longitude)
• Transponder information for each of the following
polarizations/frequencies:
- vertical high & vertical low
- horizontal high & horizontal low
or
- right
- left
• Transponder information includes:
- frequency
- symbol rate
- FEC code, and
- network ID (in hexidecimal format)
• Decoder type
2-19
Installation
54-0157 Re
v
.
H
For your reference, the satellite
configuration information for the
predefined satellites is available on
our web site at www.kvh.com/
footprint.