Filter
Top Products
The CONTROLLER ASSOC
screen will display with the
selection box around 1. Button
prompting you to select the
button on your controller that
you wish to associate an area to.
Use side arrow buttons to
toggle if applicable.
Scroll to 2. Area and choose an area you wish to
associate to the button you've selected. This will
allow the button on the chosen controller to control
the desired area.
Selecting 3. Area ON/OFF allows you to set an
AREA ON/OFF
or SCENE command to that button
on your controller (for SCENE commands refer to
Advanced Settings).
Once you are done press the right soft key
(Save) to complete. You will be prompted to
continue setting associations or to proceed to the
NEXT STEP
by pressing the right soft key .
Security
NOTE: The INSTALL
CHECKLIST screen will appear
with the selection box around
STEP 6 - Security when NEXT
STEP is chosen from STEP 5.
Press the center button to
bring up the SECURITY screen.
Press the center button to
select 1. Setup Password.
Enter password using four of the
eight buttons on the RZCPG
(1 ON, 1 OFF, 2 ON, 2 OFF etc.)
NOTE: The password you
choose MUST be 4 characters
long.
You will be prompted to, and
must re-enter password.
Scroll to 2. and use the side
arrow buttons to toggle
between choices OPEN, RZCPG
Lock and System Lock.
STEP 6
10
x1
Back
SECURITY
1. Setup Password
2.
<
OPEN
>
Save
x1
Back
SECURITY
1. Setup Password
2.
<
RZCPG Lock
>
Save
x1
Back
2.
Include Controller
3. Update Controller
4. Create Areas
5. Set Associations
6. Security
Next Step
INSTALL CHECKLIST
1
ON
2
ON
3
ON
4
ON
OFF
OFF
OFF
OFF
x1
12:00 PM
Mon 05.01.200 6
Default Pr ofil e
Stand By
Menu
1
ON
2
ON
3
ON
4
ON
OFF
OFF
OFF
OFF
x1
12:00 PM
Mon 05.01.200 6
Default Pr ofil e
Stand By
Menu
1
ON
2
ON
3
ON
4
ON
OFF
OFF
OFF
OFF
x1
12:00 PM
Mon 05.01.200 6
Default Pr ofil e
Stand By
Menu
1
ON
2
ON
3
ON
4
ON
OFF
OFF
OFF
OFF
x1
12:00 PM
Mon 05.01.200 6
Default Pr ofil e
Stand By
Menu
x1
Cancel
CONTROLLER ASSOC
Dev: Room Controller
1.
<
Button 1
>
2. Area #1
3. Area ON/OFF
Save