Filter
Top Products
Using LG EzSign 2.0 Editor
10
Exporting to TV
Using a wireless network, you can transfer content
files saved on a PC to the TV without having to
connect a USB device. To use this function, you
must first connect a wireless dongle to the TV in
order to connect to the wireless network. 12 Page
See the network configuration.) The PC must also
be connected to a router via a wired or wireless
connection.
PC Editor S/W
USB Wi-Fi Dongle
NOTE
ꔈ If a wireless dongle is used, EzSign content files
saved on a USB device cannot be played.
ꔈ If a content file is transferred via the wireless
dongle, the file is immediately saved in the TV
memory.
ꔈ The connection may not be established
depending on wireless signal interference or
strength.
IMPORTANT
ꔈ If there is wireless signal interference, check
whether the router is operating normally. When
there is a wall or another router between the
router and the TV, it may not work properly so
remove any obstacles before installing it.
ꔈ When multiple TVs are connected to a single
router, make sure that the rounder is working
properly before setting a network.
ꔈ Wi-Fi connection is only available through an
AP.
ꔈ External Internet environment is not supported.
ꔈ A password must be set for the router to pre-
vent other devices from being connected.
ꔈ When content files in the existing playlist 1 are
played on TV, contents files in another playlist 2
can be sent to the TV. When it happens, the
files in the playlist 2 are played as scheduled by
replacing the files being played without a pop-
up window displayed.
1 Connect a wireless dongle to the TV which is to
be connected to the router. You can check the
network connection status from the TV's net-
work menu. (The network must be connected to
the minimum gateway.)
2 Connect the PC to the router via a wireless/
wired connection.
3 In EzSign 2.0 Editor, select Send To TV.
4 Select TV Auto Scan to automatically search for
the TV connected to the router. You can manu-
ally enter an IP by selecting
+ Add TV for connection.
5 Select the TV you want to connect and then
select Send to Selected TV.
395FDKSJ34
6 When the transfer is complete, the transferred
content file is immediately played on TV.
IMPORTANT
ꔈꔈ ꔈThe TV name will first be displayed as its serial
number. You can change it as desired (up to 16
characters) by clicking the cell.