Filter
Top Products
Managing Content
13
Managing Content
* The On-Screen Display (OSD) in this manual is an
example to help you understand how to operate
the product, and may be slightly different from your
projector depending on models.
Saving Content on TV Memory
1 Connect the USB device on which the EzSign
content is stored to the TV USB port. You will
see the following on the TV screen.
USB
EzSign TV Movie List Photo List Music List
2 Select EzSign TV using the TV remote control.
3 Select Copy to TV memory & Play in the USB
tab to save the content files exported to the
USB device in the TV memory.
The files are saved in the TV memory and the
list of files available for playing is displayed
automatically
.
TV Memory
USB
Do you want to copy the EzSign content to TV memory
and play?
Copy to TV memory & Play Play
Close
NOTE
ꔈ The USB tab is selected by default and shown
when a USB device is connected to TV.
ꔈ If the TV memory does not have a sufficient
free space, a Copy Failed! message is displayed
for 5 seconds to return to the previous screen.
IMPORTANT
ꔈ While loading or copying data to/from a USB
device or dongle, if you remove it forcefully,
EzSign may not work properly.
ꔈ
Viewing Content on TV
You can play the content saved in the USB device
or TV memory on LG EzSign TV. If you play a file
from the USB device while a file in the TV memory
is being played, the currently playing file stops and
the file on the USB device starts playing.
You can play the TV content again while the USB
content is playing.
Viewing Content Saved in the USB
Device
1 Insert the USB device containing the EzSign TV
content into the USB port on the television.
The following is displayed on the TV screen.
USB
EzSign TV Movie List Photo List Music List
2 Select EzSign TV using the TV remote control.
3 Select Play from the USB tab.
You can set the schedule mode to either dura-
tion or time. If the schedule is set to duration,
the content file is played in sequence from the
first file in the list; if it is based on time, it is
played according to the time set on the TV. In
addition, when the schedule is set to time but
no time is set up on the TV or if the time is not
correct, the file may not be played at the
expected time. Make sure you use the schedule
mode after correctly setting the current time on
the TV.