Filter
Top Products
48
206-4200
Reference: Upgrading TV/PTC Software using a USB Memory Device
Upgrading TV/PTC Software
Before you begin, note that the software upgrade les must be stored in a
folder named “LG_DTV” in the root directory of the USB memory device.
Also, ensure the USB device has been formatted with FAT format.
Note for TV Software Upgrade only: If the TV detects a later version
of software on the USB device, it will automatically display a dialog from
which you can start the software upgrade immediately. Otherwise, you can
close the dialog, and access the USB Download Menu as described below.
1. Turn the TV ON.
2.
Plug the USB memory device into the USB IN port on the TV.
3.
Press MENU on the Installer Remote to display the TV setup menus
(TV is in Pass-through Mode) or the Function Menu (TV is not in
Pass-through Mode).
4. Use the arrow navigation keys to select/highlight either the Option
menu icon from the TV setup menus or the Lock menu icon from the
Function Menu. Then, press the number “7” key a total of seven times
to display the USB Download Menu.
5. Use the Up/Down arrow keys to select Upgrade TV Software or
Upgrade PTC Software, as applicable, and press ENTER. (See
screen samples at right.)
6. Use the Up/Down arrow keys to select the upgrade to install, and then
press ENTER.
The TV will show update completion progress in a new window. Do NOT
remove the USB device until the software upgrade is complete. When a
TV software upgrade is complete, the TV will reset itself with an automatic
restart. When a PTC upgrade is complete, the TV will turn OFF.
Checking the Software Versions
You can check the software versions of the TV by
accessing the Installer Menu with the Installer
Remote: Press MENU repeatedly until the on-screen
menu display no longer toggles, and then press
9-8-7-6 + ENTER.
When you are finished, press ENTER again to exit
the Installer Menu.
Typical Installer
Menu
CPU VersionPTC Version
The following software files are found in the memory card.
[ Current TV Software Version Information ]
epak : 3.13.0
mtdinfo(RELEASE) : 0.00.0
model(RELEASE) : 3.13.0
ezcal(RELEASE) : 3.13.0
lgfont(RELEASE) : 3.13.0
TV Software Update
i
Upgrade PTC Software
i
boot(RELEASE) : 0.00.1
rootfs(RELEASE) : 0.00.1
emanual(RELEASE) : 0.00.3
kernel(RELEASE) : 3.13.0
micom(RELEASE) : 0.d0.b8
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
EPK : 3.14.00
xxLD66xH_v3.14.00
xxLD66xH_v1.00.014
[ Current TV Software Version Information ]
epak : 3.13.0
mtdinfo(RELEASE) : 0.00.0
model(RELEASE) : 3.13.0
ezcal(RELEASE) : 3.13.0
lgfont(RELEASE) : 3.13.0
TV Software Update
i
boot(RELEASE) : 0.00.1
rootfs(RELEASE) : 0.00.1
emanual(RELEASE) : 0.00.3
kernel(RELEASE) : 3.13.0
micom(RELEASE) : 0.d0.b8
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
EPK :
SPLASH.bmp
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (TLX)
Return Enter
xxLD66xH PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.016 CPU V1.21.00