Filter
Top Products
21
System Setup
On-Screen Display (OSD)
Some of these functions appear during VCR
operation.
❶❷ ❸ ❹ ❺
❻❼
❶TAPE SPEED DISPLAY
Shows the current tape speed.
❷FUNCTION DISPLAY
Indicates the function in progress.
❸HI-FI DISPLAY
Indicates the unit is playing back tape recorded in Hi-Fi.
❹CHANNEL DISPLAY
I
ndicates the selected channel (or LINE1, LINE2).
❺STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻DATE DISPLAY
Shows the current date. (Month/Date/Day of the week
format)
❼CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining
time on the tape.
Each press of MEMORY/ENTER changes the TV
on-screen displays in the following sequence.
Notes:
The function displays remain on the TV screen for 5
seconds.
The clock (or tape counter, tape remaining) mode will
continue to be shown until you press MEMORY/ENTER.
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
EASY INFORMATION
If the Extended Data Service (XDS) signals are
provided along with normal TV signal in your area or
during playback of a tape recorded with Extended
Data Service (XDS) signals, the station ID, program
title, and program details are shown on the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press MEMORY/ENTER and the station ID
will appear on the TV screen. Press MEMORY/ENTER
again and the program details will appear on the TV
screen.
When viewing a tape recorded with Extended Data
Service (XDS) signals, press MEMORY/ENTER twice
and the program title and program details will appear
on the TV screen.
PROGRAM DETAILS
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are
not
applicable to this program.
On-Screen Menus Setup
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) functions are accessed
conveniently with the on-screen menus, that lead you
through each step. The following pages describe the
on-screen menu selections available.
MENU SELECTION
Your VCR allows remote control adjustment of several
features.
1. Press MENU and the MAIN menu will appear.
2. Select the desired menu with v/V button and then
press MEMORY/ENTER.
Note:
Menus remain on-screen for 3 minutes.
3. Press MENU when finished.
PLAY HI-FI CH 4
SP STEREO
FEB 2 , WED 2:15 PM
REM 1:58
0:35:40
2:15 PM
STOP CH 4
SP STEREO
JUL 5 , SAT 2:15 PM
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
CH 4
SP WABC STEREO
“Home video”
FEB 7 , MON 2:15 PM
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
CLOCK SET (page 23)
PROGRAM (page 31)
TUNING (page 22)
SETUP (page 22)
MAIN MENU
VCR Operation Seup