Filter
Top Products
53
Reference
Symptom
Some channels are
skipped over when using
TRK/PRESET (
v/V
)
Picture and sound of
broadcasting channel are
weak or missing.
Camcorder image via
A/V input to Home
Theater System is not
shown on TV screen.
Timer recording is not
possible.
indicator
appears
after
Home Theater
System
is turned off.
Stereo Audio Record
and/or Playback is not
present.
Cause
Those channels were deleted with the
CH. ADD/DEL option.
Antenna or cables are loose.
Wrong TUNING BAND option is being
used.
Home Theater System SOURCE
SELECT is not set to L 1 or L 2.
Clock in Home Theater System is not
set to correct time.
Timer has been programmed
incorrectly.
indicator does not appear after
programming timer.
Home Theater System is in Timer
Recording mode.
TV is not Stereo-compatible.
Broadcast program is not in stereo
format.
Home Theater System BROADCAST
TYPE mode is set to SAP or MONO.
Correction
Use CH. ADD/DEL. to restore
channels. See “Channel Selection”
on page 22.
Tighten connections or replace cable.
Try all TUNING BAND options. See
“Channel Selection” on page 22 for
details.
Use INPUT to select LINE input
source (L 1 or L 2).
Set clock to correct time. See
“Setting the Clock” on page 23.
Reprogram Timer. See “Timer
Recording” on pages 30 and 31.
Reprogram Timer.
This is the normal indication that the
Home Theater System is in TIMER
mode.
No action is possible.
No action is possible.
Set BROADCAST TYPE mode to
STEREO. See “Setting the VCR
Setup Menu” on page 22.
Moisture Condensation
Moisture condensation can occur:
• When the Home Theater System is moved from a
cold place to a warm place.
• Under extremely humid conditions.
In locations where moisture condensation may occur:
•
Keep the
Home Theater System
plugged into an AC
power outlet with POWER On. This will help prevent
condensation.
• When condensation has occurred, wait a few hours
for the Home Theater System to dry before using it.