Filter
Top Products
33
Operation
VHS Hi-Fi Stereo System/
MTS Broadcast
This Home Theater System is equipped with the VHS
Hi-Fi audio sound system for recording and playback.
The information below gives a brief description of Hi-Fi
audio and how to record and play a tape in the Hi-Fi
audio mode.
1. Set the AUDIO MODE option to Hi-Fi on the SETUP
menu .
2. Set the AUDIO OUTPUT option to STEREO
position.
(STEREO) POSITION: The left channel sound (L) is
heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard
from both speakers.
(RIGHT) POSITION: The right channel sound (R) is heard
from both speakers.
3. Press MENU.
4. Insert a cassette and press PLAY ( B).
Adjust volume at your stereo system.
MTS (Multichannel TV Sound)
This Home Theater System will decode MTS stereo and
bilingual (SAP) off-the-air broadcast sound signals. It
also decodes stereo TV sound from local cable
companies, as long as they operate on assigned cable
frequencies and use the EIA-recommended MTS
stereo/bilingual TV sound system.
Multichannel TV Sound Indicator
Shows onscreen as illustrated below when MEMORY/
ENTER is pressed.
One or both of the indicators will light, depending on the
MTS broadcast.
If only STEREO appears on the TV screen.
The Home Theater System can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE option is in
the STEREO position. The Home Theater System will also
record mono audio onto the mono audio track.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
1. Insert a video cassette with the anti erasure safety
tab intact.
2. Set the BROADCAST TYPE option to SAP (SETUP
menu).
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
3. Press MENU.
4. Select the desired recording speed (SP or SLP) with
SPEED.
5. Select the desired channel. SAP should appear on
the TV screen.
6. Press REC/ITR (z) once
You are now recording the program you see and hear on the
TV.
7. Press STOP (x) twice to stop recording.
STEREO
Lights up when a stereo broadcast
is being received.
SAP
Lights up when a SAP BILINGUAL
broadcast is being received.
TV screen
CH 4
STEREO/SAP