Filter
Top Products
23
System Setup
Setting the Clock
The
Home Theater System
gives you two ways to set
the time and date: the Auto Clock Feature or manually.
The Auto Clock feature enables the
Home Theater
System
to set up the clock while the
Home Theater
System
is turned off.
AUTO CLOCK SET
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the Combi Receiver looks for a channel carrying
XDS (Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
The Auto Clock feature enables the Combi Receiver to
set up the clock while the Combi Receiver is turned off.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to choose the CLOCK menu.
Press MEMORY/ENTER and the CLOCK menu will
appear.
3. Use
V to choose the AUTO CLOCK SET option.
Use b/B to choose ON.
The Auto Clock Set feature is set to ON at the factory. In
the ON setting, the Combi Receiver looks for a channel
carrying XDS (Extended Data Services) information. XDS
updates the clock using the Coordinated Universal Time.
4. Use E to choose the DAYLIGHT SAVINGS option.
Use
F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
5. Use E to choose the TIME ZONE option.
Use
F or G to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII).
If “AUTO” is selected as the time zone, the VCR sets the
clock using the first Coordinated Universal Time
information it finds in a broadcast signal.
6. Press MENU when finished.
7. Turn off the Home Theater System and the auto
clock set feature sets the time.
Note:
There are cases where the TV station does not send or
sends wrong date and/or time information and the Home
Theater System sets the incorrect time.
If this happens we recommend that you set the clock
manually.
MANUAL CLOCK SET
1. Press MENU and the MAIN menu will appear.
2. Use v/V to choose the CLOCK menu.
Press MEMORY/ENTER and the CLOCK menu will
appear.
3. Use b/B to choose the month.
4. Use V to choose the DAY option.
Use b/B to choose the date.
The day of the week will display automatically.
5. Use V to choose the YEAR option.
Use b/B to choose the year.
6. Use V to choose the TIME option.
Use b/B to choose the time.
Press and hold b/B to advance clock
continuously.
7. Use
E to choose the DAYLIGHT SAVINGS option.
Use
F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
8. Press MENU when finished.
Note:
If setting the clock manually, “AUTO CLOCK SET”
must set to “OFF”.
If set to “ON”, an incorrect date and/or time will be
entered again when the Home Theater System is
turned off.
The clock uses the 12-hour system. (Be sure to set AM
and PM correctly.) (AM does not appear.)
The initial Clock Setting is JANUARY 1, 2005, 12:00 AM.
Things to know before starting
2005
SAT
2005
SAT