48
RADIO Operation
Presetting the Radio Stations
You can preset 50 stations for FM and AM. Before
tuning, make sure that you have turned down the
volume.
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
2. Use 3/4 on the remote control to select the
desired Station.
If you select a blank column, R-SKIP appears in the
display window.
3. Press FM/AM on the remote control to select the
desired band.
4. Hold down TUNING (4/3) on the remote control
for 1 or 2 seconds, and a station is searched for
automatically.
5. Press MEMORY/ENTER on the remote control.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
Listening to the Radio
Preset radio stations in the Combi Receiver memory
first (see “Presetting Radio Stations” on the left).
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
The last received station is tuned in.
2. Use 3/4 on the remote control repeatedly to
select the preset station you want.
Each time you press the button, the DVD/VCR Receiver
tunes in one preset station at a time.
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
To Clear the Stored Radio
Stations
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
2. Use 3/4 on the remote control to select your
desired station.
3. Press CLEAR the remote control to clear the
stored radio station.
Note:
While record or record pause mode, the CLEAR function
may not be operated.
