Filter
Top Products
11
INTRODUCTION
POWER (
1
)
Turns DVR on or off.
LOCK
Displays the lock menu to change
user type or disable system
operation.
ID
Set the appropriate DVR system
ID to operate via the IR Remote
Controller when using the multiple
DVR.
Press the ID button then press the
number button within 2 seconds to
select the system ID of the DVR.
If you set the system ID to “0”, you
can control multiple DVR at the
same time.
MAIN
Displays the MAIN menu to set
the screen mode to full, 4, 6, 8, 9
or 16 screens.
SPOT
Enter SPOT mode to allow spot
monitor control.
ALM.OFF
Cancels alarm activation and
returns the system to the condition
before the alarm was activated.
OSD
Accesses or removes the system
control bar (OSD).
SETUP/ESC
Displays the setup menu or can-
cels operation of the setup menu.
Arrow Buttons (
b B v V
)
Selects or moves between the
menu options.
ENTER
Confirms menu selections.
COPY
Copies the recording data to an
external device.
SEARCH
Displays the search menu.
MARK
Sets the mark point for recording
search. You can set the mark
point during the single channel
playback of recorded data.
PAUSE (
X
)
Pauses playback.
STOP(
x
)
Stops playback.
REC (
z
)
Starts or stops recording.
m/c/.
Searches the recorded images in
reverse or skips the recorded
images.
bB
Playback or reverse playback of
recorded images.
M/C/>
Forward searches the recorded
images or skips the recorded
images.
Number Buttons (0,1-9)
To select the PTZ preset number,
ID, or channel.
INFO
Displays or removes the system
information window.
LOG
Displays or removes the System
Log List window.
PTZ
Switches this unit to PTZ mode to
control the connected PTZ camera.
TOUR
Tours all registered preset posi-
tions in the camera.
ZOOM + / -
Zooms in/out on live images or on
the playback window.
FOCUS + / -
Adjusts the focus of a camera.
IRIS + / -
Adjusts the iris of a camera.
PRESET
- SET: Registers the PTZ
camera's preset positions.
- CLEAR: Deletes a memorized
preset position.
- MOVE: Moves the camera to
the preset position.
F1
This button is not available.
Remote Control