Filter
Top Products
20
AC INPUT
- Connect the power cord correctly as shown.
Power Cord Connection
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
If you don’t use the PC cable provided, DPM mode may not work.
Monitor Display Specifications
Note
a. For optimum picture quality, use standard WXGA
1360x768 computer output at a 60Hz refresh rate.
Using other formats (VGA, SVGA, etc.) or refresh
rates may result in reduced picture quality. (To
change the computer video output format, please
refer to the operating manual for the computer you
are using).
b. If the message
Out of range appears on the
screen, adjust the PC output to a format listed in
the Monitor Display Specifications table.
c. The synchronization input form for Horizontal and
Vertical frequencies is separate.
VGA
SVGA
XGA
WXGA
MODE Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x480
800x600
1024x768
1280x768
1360x768
31.4
37.8
48.3
47.6
47.6
60
60
60
60
60
PC Setup
1
2
3
4
Connect the TV to the PC with the PC cable.
Connect the PC audio output to the TV's PC SOUND input.
Turn on the PC.
Use the TV/AV button on the remote control to select PC.
NOTE
Connect the signal cable (DVI-D cable, Not
DVI to D-Sub cable) from the DVI output sock-
et of the PC to the DVI input socket of the set
when using a PC with DVI output. In some
video cards, DVI-Analog output may not be
supported.