Filter
Top Products
43
• Bitstream: Select Bitstream if you
connect the DVD Player’s DIGITAL
OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or
MPEG decoder.
•
PCM (Pulse Code Modulation):
Select when connected to a two-chan-
nel digital stereo amplifier. DVDs
encoded in Dolby Digital, DTS or
MPEG will be automatically down-
mixed to two-channel PCM audio.
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type of audio system you use.
Dolby Digital / DTS / MPEG
Press the MENU button twice and then use the
D
/
E
button to select
AUDIO.
Press the
G
button and then use
D
/
E
button to select Dolby Digital / DTS
/ MPEG.
Press the
G
button and then use
D
/
E
button to select Bitstream or PCM.
Press the ENTER button.
Press the EXIT button to resume normal playback
.
Dolby Digital
DTS
MPEG
Sample Freq.
DRC
Vocal
Bitstream
PCM
1
2
3
4
5
AUDIO
Move
G
Select
F
Prev.
D
E
Dolby Digital
G
DVD-V
DivX
- If your receiver or amplifier is NOT
capable of handling 96 kHz signals,
select 48 kHz. When this choice is
made, this unit automatically converts
any 96 kHz signals to 48 kHz so your
system can decode them.
If your receiver or amplifier is capable
of handling 96 kHz signals, select 96
kHz. When this choice is made, this
unit passes each type of signal
through without any further process-
ing.
Check the documentation for your
amplifier to verify its capabilities.
Sample Freq. (Frequency)
Press the MENU button twice and then use the
D
/
E
button to select
AUDIO.
Press the
G
button and then use
D
/
E
button to select Sample Freq..
Press the
G
button and then use
D
/
E
button to select 48KHz or 96KHz.
Press the ENTER button.
Press the EXIT button to resume normal playback.
Dolby Digital
DTS
MPEG
Sample Freq.
DRC
Vocal
48KHz
96KHz
1
2
3
4
5
AUDIO
Move
G
Select
F
Prev.
D
E
Sample Freq.
G
DVD-V
DVD Menu options -
DVD Menu options -
AUDIO
AUDIO
DVD operation
DVD operation