Dual-Band Wireless A/G Media Center Extender
15
Chapter 3: Connecting the Media Center Extender
Instructions for Connecting the Extender
3. Plug the Extender’s power cord into an electrical outlet.
4. The Extender will automatically power on. If it does not, press the standby button
on the Extender’s front panel, and then check the POWER switch on the
Extender’s back panel.
Proceed to “Chapter 4: Setting up the Media Center Extender.”
Figure 3-7: Power on the Extender
Figure 3-8: Press the
Power Button
Figure 3-9: Check the
POWER Switch