Filter
Top Products
19 -
/ . Searching stops when the DVD recorder
receives a station.
Channel: Changes the channel number. Use
/ to select the “Channel“ option and then
press / .
MFT: Changes the frequency to fi ne-tuning. Use
/ to select the “Fine“ option and then
press / .
PAL/SECAM (with Centros 2172): Changes the
receiver standard. If there is interference with
the image, use / to select the “PAL/SE-
CAM“ option and then use / to select
“SECAM“ for the SECAM-L standard.
Then press OK to confi rm the settings and return
to the “Program list“ menu.
Renaming stations
You can give whatever name you like to a station.
Names should have a maximum of fi ve characters.
Use / to select a programme in the
“Programme list“ and press OK. The options are
displayed on the left-hand side of the “Pro-
gramme list“ menu.
Use / to select the “Rename station“
option, and press OK. The “Keypad“ menu is
displayed.
01 3456789
ABCDEFGHI J
KLMNOPQRST
UVWXYZ
ABC
2
Upper case letter
SpaceOK
Cancel
Delete
Enter a name for the station. Use to
select a character and press OK.
Upper case letter: Switches the keypad so that
only upper case is used.
Lower case letter: Switches the keypad so that
only lower case is used.
Symbols: Switches the keypad to symbol
characters.
4.
1.
2.
3.
•
•
ABC...123: Inserts the corresponding character
at the cursor position.
OK: Select this option to end and save.
Cancel: Select this option to close the menu.
Any changes made will be discarded.
Space: Inserts a space at the cursor position.
Delete: Deletes the character to the left of the
cursor position.
/ : Moves the cursor to the left or right.
Note: Remote control buttons for keying in a
name (all selections must be confi rmed using the
remote control‘s OK button).
: Inserts a space at the cursor position.
: Deletes the character to the right of the
cursor position.
: Deletes the character to the left of the
cursor position.
P+ / P-: Moves the cursor to the left or right.
TEXT, INFO: Toggles the keypad between upper
case, lower case and symbols.
Then press OK to confi rm the settings and return
to the “Program list“ menu.
•
•
•
•
•
•
4.
Moving programmes
You can sort the programme positions in the “Pro-
gramme list“ menu.
Use / to select a programme in the
“Programme list“ and press OK. The options are
displayed on the left-hand side of the “Pro-
gramme list“ menu.
Use / to select the “Move“ option, and
press OK.
Use / to select the position you require.
Then press OK or
again in the pro-
gramme list to change.
Deleting a programme
You can delete a programme from the “Programme
list“ menu.
Use / to select a programme in the “Pro-
gramme list“ and press OK.
Use / to select the “Delete“ option, and
press OK. The programme is deleted.
Decoder on/off
Use / to select the programme that you
wish to reroute via the decoder and press OK.
The options are displayed on the left-hand side
of the “Programme list“ menu.
Use / to select the “Decoder on/off“
option, and press OK. When you select “on“,
“Decoder“ appears under the program shown in
the small picture.
1.
2.
3.
1.
2.
1.
2.
Initial Installation