Filter
Top Products
29 960-Hour Time Lapse Video Cassette Recorder 960-Hour Time Lapse Video Cassette Recorder 10
Example: To set the clock to April 12, 2000 at 9:30
Clock Setting
1 Turn the power on to all devices used.
2 Press the MENU button, the initial MENU is displayed.
The arrow mark ( ) is located in “VCR Mode Set”.
Initial Menu
Setting the Clock
3 Press the SHIFT button, the VCR MODE SET menu is displayed.
The arrow mark ( ) is located in “Clock Set”.
5 Press the SET - (or +) button to set the hours (eg : 09), then press
the SHIFT button.
4 Press the SHIFT button, the CLOCK SET menu is displayed.
Tape Counter (Zero Search)
Using the counter, it is easy to find a desired recording.
1 Press the CLEAR button, at the beginning of the desired recording.
• The counter will be reset to “0H 00M 00S” (on screen).
• The counter will be reset to “0H 00M”(on the display panel).
2 After recording or playback, press the Menu button to display the initial
MENU.
3 Press the SHIFT button to move the arrow mark ( ) to Search Select.
4 Press the SHIFT button to display the SEARCH SELECT menu. The
SEARCH SELECT menu is displayed.
5 Press the SHIFT button to move the arrow mark ( ) to Zero Search.
6 Press the SHIFT button to search the counter “0H 00M 00S” (“0H 00M”
on the display panel).
• The display returns to the normal screen.
• The tape is rewound or advanced to the counter “0H 00M 00S”
reading(“0H 00M” on the display panel).
✔
• When you insert a
cassette, the
counter always
resets to zero.
• There is no tape
counter indication for
the blank
portions of tape.
• In the 2-hour record-
ing speed mode
only, the tape
counter indicates
real hours, minutes
and seconds.
• In the other SP
recording speed
modes (24H, 36H),
the tape counter
indication is a ratio
of the 2-hour mode
base indication. (In
24-hour recording
mode, each
“second” of the tape
counter actually
represents approxi-
mately 24/2 =12 real
seconds.)
• There may be a
slight discrepancy
between the position
shown on the tape
counter and the
actual tape position.
• When rewinding the
tape past the “0H
00M 00S” position
(“0H 00M” on the
display panel), a
minus(-) is dis-
played.
Other Functions