Filter
Top Products
21 960-Hour Time Lapse Video Cassette Recorder 960-Hour Time Lapse Video Cassette Recorder 18
To Cancel a Program Timer Recording
1 Repeat step 1 above.
2 Press the SHIFT (or ) button until the cursor is located in the “Y”
corresponding to the timer recording to cancel.
3 Press the SET - (or +) button, to select “N”.
4 Press the MENU button three times until the normal screen is displayed.
5 Press the POWER/TIMER button.
• The clear button can erase the programmed timer recording in the line
that the cursor is located.
Notes...
• During timer recording all the buttons on the VCR, except the STOP
button, are disabled. If the STOP button is pressed for three seconds
during timer recording, the recording will stop. During timer recording
stand-by, press the POWER/TIMER button if the buttons do not respond.
• If there is a power loss, the recording will be interrupted. When the power
is restored, the recording will resume if the stop time has not yet been
reached, and “ “ will be flashing on the display panel. The VCR inter-
nal battery is completely charged after the VCR has been connected to an
AC power outlet for 48 hours, and it will maintain all the VCR settings
memory for up to 30 days.
• Set the timer recordings so that the recording times do not overlap. If they
do, the one with the earliest recording start time will have priority.
(See chart below)
• If the cassette tape is ejected while timer recording is set, the buzzer will
be heard 5 times (when the buzzer function is set to “YES”.)
Connecting to a Lorex Monitor for Alarm Recording