Filter
Top Products
9 Press the SET - (or +) button to set the recording stop minutes
(eg : 00), then press the SHIFT button.
10 Press the SET - (or +) button to select the recording speed (eg : 24),
then press the SHIFT button.
• The cursor is moved to the N/Y position.
11 Press the SET - (or +) button to select “Y”.
Y . . . . . recording will take place
N . . . . . recording will not take place
Programmed timer recording Example 1
• Repeat steps 4 to 13 to program timer recordings for other days of the
week.
• To set two or more timer recordings the same day of the week, press
the SHIFT button, until the cursor located in the day of the week for
the second recording, then press the SET - (or +) button, to set the
desired day of the week. With each press of the SET - ( or +) button,
the day will change as indicated below.
SET - : ← direction , SET + : → direction
23 960-Hour Time Lapse Video Cassette Recorder 960-Hour Time Lapse Video Cassette Recorder 16
✔
• If the set stop time is
earlier than or the
same time as the set
start time, the VCR
will consider the stop
time to be the follow-
ing day.
✔
• During series
recording, auto-
repeat recording or
timer recording are
not possible.
• If in the REC
MODE SET menu,
“Series Rec Set” is
set to “NO”, series
recording will not
be possible.
3 Press the REC button on VCR No.1.
• Recording will start in series recording mode.
4 Set the security lock on VCR No.1.
• When the end of the tape on VCR No.1 is reached, the output at the
SERIES OUT terminal will switch signal. This will start recording on
VCR No.2, the tape will stop and be ejected on VCR No.1.