Filter
Top Products
3 960-Hour Time Lapse Video Cassette Recorder 960-Hour Time Lapse Video Cassette Recorder 36
6 Power Loss indicator :
Flashes on after power loss.
7 CNT indicator : CNT
Comes on when the tape or alarm counter is on.
8 SPD indicator : SPD
Comes on when the play or recording speed is on.
9 AM indicator : AM
(PM : “AM” off)
10 RMC.L indicator : RMC.L
Comes on when the RMC LOCK sw is set to the “ON” position.
11 S.REC indicator : S.REC
Comes on when “YES” is selected in the menu for the series recording.
12 R.REC indicator : R.REC
Comes on when “YES” is selected in the menu for the repeat recording.
13 SET LOCK SW indicator :
Comes on when the SET LOCK sw is set to the “ON” position.
14 Mode display
TAPE COUNTER display (eg:10:HOUR,59:MINUTE)
– Maximum Hour : 19 - Maximum Minute : 59
ALARM COUNTER display (eg: A:Alarm, 32:Alarm No.)
PLAY/REC SPEED display (eg: 960H:Play/Recording Speed)
TIME display (eg: 7:HOUR , 07:MINUTE)
ERROR display (eg: E:Error , 04:Error No.)
– E-01 : The cassette cannot be loaded or unloaded.
– E-02 : The tape stops.
– E-03 : The drum can not rotate properly.
– E-04 : The tape is cut/broken.
AUDIO ON display (eg: A:Audio , 12H:Play Speed)
If you are also using a LOREX Multi View system, use the following diagrams as
a guide to connecting the VCR for normal or alarm recording.
Connecting to a Multiview System for Normal Recording