12
Y
our TV can receive Antenna (local) or Cable
TV channels.This makes it easy for you to
scan through only available channels when you
use the CH +/- buttons.
Before you start Auto Program, connect the
Antenna or Cable TV signal to the TV as
described on page seven.Also make sure Tuner
Mode is set correctly as described on page 11.
1
Press MENU to see the menu.
2
Press 5 or ▼ to select INSTALL.
3
Press 3 to see the INSTALL menu.
4
Press 5 or ▼ to highlight AUTO
PROGRAM.
5
Press 3 to start scanning channels.
Auto Programming will store all avail-
able channels in the TV’s memory,
then tune to the lowest available
channel when done.
6
Press STATUS/EXIT to remove the
menu.
AUTO P
ROGRAM (SETTING UP CHANNELS)
If you have Cable TV, channels 1-125 are
possible. If you connect a regular antenna
to the TV, channels 2-69 are possible.
HELPFUL HINT
More...
