Filter
Top Products
8
TO TV
CABLE
IN
1
2
OUTPUT
CH
3 4
4
ANT 75‰
3
Cable TV signal from
the Cable Company
75Ω
Coaxial
Cable
75Ω jack on rear
of Television
I
f you have a Cable Box, follow either set of these steps to
complete your connections.
Cable Box with RF In/Out Jacks
This connection will not supply Stereo sound to the TV.
The sound from the Cable Box will be monaural (single-
channel, not left and right).
1
Connect the Cable TV signal to the IN jack
(or RF IN or CABLE IN) on the Cable Box.
2
Connect an RF coaxial cable (not supplied) to the
OUT jack (or TO TV or RF OUT) of the Cable
Box.
3
Connect the other end of the coaxial cable
to the TV’s 75Ω jack. Screw it down finger tight.
4
Set the Channel 3/4 (or Output channel)
switch of the Cable Box to 3 or 4. Set the
TV to the same channel. When watching TV
programming, change channels at the Cable Box,
not the TV.
Cable Box with
Audio/Video Out Jacks
This connection will supply Stereo sound to the TV.
1
Connect the Cable TV signal to the IN jack
(or RF IN or CABLE IN) on the Cable Box.
2
Using an RCA-type video cable, connect one
end of the video cable to the Video Out
jack of the Cable Box.
Connect the other end of the cable to the
yellow VIDEO In jack on the front of the TV.
Video cables are usually marked with yellow and
are available from Magnavox or electronics retail-
ers. Video jacks on most equipment are yellow.
3
Using RCA-type, stereo audio cables, connect
one end of the cables to the left and right
Audio Out jacks of the Cable Box.
Connect the other end of the cables to the
red and white AUDIO L/R (left/right) In
jacks on the front of the TV.
Audio cables are usually marked with red and
white and are available from Magnavox or elec-
tronics retailers.
The right audio jack is red and the left audio jack
is white. Match the cable colors to the jack colors.
4
Press the CH +/- buttons to set the TV to
the FRONT channel. (Go to your lowest
channel, for example channel 1, then change chan-
nels down to find FRONT.)
When watching TV programming, change channels
at the Cable Box, not the TV.
CABLE BOX
CONNECTIONS
– VOLUME +
CHANNEL
MENU
– VOLUME +
CHANNEL
MENU
AUDIO
VIDEO L R
AUDIO
VIDEO L R
2
3
CABLE
IN
TO
TV
VIDEO
OUT
LR
AUDIO
OUT
3 4
OUTPUT
CH
1
Cable
TV signal
Cable Box
Audio cables
(red and white)
Video cable
(yellow)