Magnavox MVR430MG VCR User Manual


 
10 Hookups with a Stereo TV
Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR, then con-
nect the other end of the video cable to the VIDEO IN Jack on your TV.
3
MVR630MG
Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the
VCR, matching cable colors to the jack colors.Then, connect the other end of the audio
cable to the AUDIO IN Jacks on your TV, again matching cable colors to the jack colors.
If your TVs AUDIO IN jacks or your stereo audio cable ends are not color coded, connect the red
(right) AUDIO OUT jack of the VCR to the right AUDIO IN jack on the TV. Connect the white
(left) AUDIO OUT jack of the VCR to the left AUDIO IN jack on the TV. The AUDIO IN jacks on
your TV should be marked left and right. If they are not, consult your TV owners manual.
MVR430MG
Connect an audio cable to the white AUDIO OUT jack on the back of the VCR. Then,
connect the other end of the audio cable to the AUDIO IN jack on your TV.
If your TV has Right and Left AUDIO IN jacks, you must use a Y splitter audio cable as illustrated
to deliver audio to the TVs right and left channels.
4
Turn on your TV, making sure it is in Line Input mode. This might be referred to as the TVs A/V
IN or Audio/Video In channel, External or EXT channel, or AUX or Auxiliary In channel. Please refer
to your TV owners manual for details.
antenna or cable to
ANT(enna) IN Jack
Video Cable
Stereo Audio Cable
Y splitter Audio Cable
VIDEO (yellow) and
AUDIO (red and white)
OUT Jacks
VIDEO (yellow) and
AUDIO (white) OUT Jacks
Audio and Video
IN Jacks on TV
Audio and Video
IN Jacks on TV
1
2
3
MVR630MG
MVR430MG
antenna or cable to
ANT(enna) IN Jack
1
Video Cable
2
3
mvr630mg.QX33 2/11/02 12:05 PM Page 10