Filter
Top Products
CH
321
654
987
0
POWER
STATUS/EXIT
MEMORY SLOWREC/OTR
SPEED
TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
One-Touch Recording 27
1
Press the CH(annel) o/p button or the Number
buttons to select the channel you want to record.
OTR (0:30)
CH12
2
Press the REC(ord)/OTR button repeatedly until the
desired recording length (30 minutes to eight hours)
appears on the TV screen. Recording will begin immedi-
ately. The RECORD light and the TIMER light will appear on
the VCR display panel.
The One-Touch Recording (OTR) feature allows you to set an
immediate timed recording 30 minutes to eight hours long.
Before you begin:
● Set up the channels at the VCR. Details are on page 12.
● Select a recording speed (SP, SLP) with the SPEED button.
● Put a tape in the VCR. Make sure the tape’s record tab is intact
and the tape is long enough to record the program(s). If the end
of a tape is reached during an OTR, the VCR will eject the tape
and turn itself off.
● Place the VCR in VCR position. (The VCR/TV light will appear
on the VCR display panel. If it does not, press the VCR/TV but-
ton once.)
3
To stop an OTR before recording is finished, press
the STOP/p button.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button repeatedly until REC appears in the
upper left corner of the TV screen. (STATUS must be set
to ON. See page 20 for details.) The RECORD light will
remain on the VCR display panel, but the TIMER light will
disappear.
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the desired
length appears on the screen.
• If you begin an OTR when another
recording is paused, the OTR will
begin.
• You can not pause an OTR.
• If the preset time for a timer record-
ing comes up during an OTR, the
OTR has priority. A message will
remind you when the timer recording
was scheduled to begin. You may let
the OTR continue; the timer recording
will not take place. Or, stop the OTR
and turn off the VCR immediately.
The timer recording will take place if
you turn off the VCR before the timer
recording’s scheduled start time.
• When the OTR finishes, the VCR
shuts itself off.
Helpful Hints
2
3
1
mvr630mg.QX33 2/11/02 12:05 PM Page 27