Filter
Top Products
CH
321
654
987
0
POWER
STATUS/EXIT
MEMORY SLOWREC/OTR
SPEED
TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
18 Remote Control Buttons
SPEED Button
Press to select the recording speed (SP or SLP).
Details are on pages 30 and 46.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 25. Or, press
repeatedly to start a One-Touch Recording. Details are on page 27.
MEMORY Button
Press to memorize a tape position at which the real-time
counter was set to 0:00:00. Details are on page 34.
POWER Button
Press to turn on or off the VCR.
MENU Button
Press to access the VCR menu.
Number Buttons
Press to select channels at the VCR or use
to set up VCR features (such as the clock).
Cable Users ●
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will appear after a brief delay. (There also
may be a brief delay when you select channels 10, 11, and 12.) To
select channels 100 and above, enter channel numbers as a three-digit
number. For example, to select channel 117, press 1, 1, 7.
Antenna Users ●
Only channels 2-69 will be available. For quickest results, enter
channels as above.
PLAY/o Button
Press to play a tape; press to release Slow, Search, or Still
mode and return to normal playback. Details are on page 36.
Press to select an item in the on-screen menu.
EJECT Button
Press to eject the tape.
STILL/PAUSE Button
While recording, press to temporarily stop the recording (pause). Press a
second time to resume normal recording. Details are on page 25.
You can not pause a One-Touch Recording.
Press during tape playback to freeze the picture. Press again to resume
playback. Details are on page 36.
SLOW Button
During tape playback, press to view the picture in slow motion.
Press again to resume normal playback. Details are on page 36.
mvr630mg.QX33 2/11/02 12:05 PM Page 18