Magnavox MVR430MG VCR User Manual


 
CH
321
654
987
0
POWER
STATUS/EXIT
MEMORY SLOWREC/OTR
SPEED
TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
Timer Recording (cont’d) 31
6
Repeat steps 1-4 to make sure you have cleared the
correct timer recording.
1
With the VCR on and in VCR position (the VCR/TV light
will appear on the display panel), press the MENU but-
ton.
Checking or Cancelling Timer Recordings
2
Press the PLAY/o button or the STOP/p button to
select PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to
select PROGRAM REVIEW, then press the F.FWD/B
button. The timer recording information for the program
in the lowest numbered slot will appear on the screen. If no
timer recordings are set, nothing will happen when you
press the F.FWD/B button.
4
Press the F.FWD/B button repeatedly to review all
programmed timer recordings. If you dont press the
F.FWD/B button within 10 seconds, the VCR will automati-
cally display information about the next programmed timer
recording. This will continue until all timer recordings have
been displayed. Then the menu will disappear.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or infor-
mation about other timer recordings will appear. If you do
not press any other buttons, the display will disappear after
all timer recordings have been displayed.
• CLASH may flash on the screen when you
finish setting a timer recording. This
means that the timer recording you just
programmed and another timer recording
overlap. The current timer recording will
not take place. You may choose to cancel
the overlapping timer recording.
• To stop a started timer recording, press
the Stop/Eject
C
/
A
button on the VCR.
• The VCR may lose timer recordings if the
power fails. Reset the channels and the
clock before resetting the timer recordings.
Details are on pages 11 and 15.
• If the preset time for a timer recording
comes up during an OTR, the OTR has
priority. A message will remind you when
the timer recording was scheduled to
begin. You may let the OTR continue; the
timer recording will not take place. Or,
stop the OTR and turn off the VCR imme-
diately. The timer recording will take
place if you turn off the VCR before the
timer recording’s scheduled start time.
See page 42 for more hints.
Helpful Hints
2-4
1
5
mvr630mg.QX33 2/11/02 12:05 PM Page 31