Filter
Top Products
CH
321
654
987
0
POWER
STATUS/EXIT
MEMORY SLOWREC/OTR
SPEED
TIME SEARCH STILL/PAUSE
VCR/TV EJECT
MENU
CLEAR
REW
PLAY
STOP
F.FWD
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
30 Timer Recording (cont’d)
8
Press the Number 1 button to record in SP speed
or the Number 2 button to record in SLP speed.
(See the box below.) You cannot use the SPEED button at
this time.
9
Press two Number buttons for the month and two
Number buttons for the day you want to record the
program. For example, for July 10, 2002, press 07, 10.
The day of the week and the year will appear automatically.
(You cannot program the VCR to record more than one
year in advance.)
ONE TIME PROGRAM
PROGRAM 1
CHANNEL 10
TIME ON 09:30 PM
TIME OFF 11:00 PM
REC SPEED SLP
START DATE 07/10/02
WED.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
10
Press the STATUS/EXIT button. PROGRAM WAS
COMPLETED/PLEASE TURN OFF VCR FOR TIMER
RECORDING will appear on the screen briefly. (If
PROGRAM NOT COMPLETED appears, try again from
step 1.)
11
Press the POWER button to turn off the VCR
power. The TIMER light will appear on the display panel.
The TIMER light will flash if there is no tape in the VCR.
If the timer recording will take place several hours or
days from now, you may use the VCR until time for the
recording. Turn off the VCR a few minutes before the
recording starts. If you forget to turn off the VCR,
PLEASE TURN OFF VCR FOR TIMER RECORDING
flashes on your TV screen two minutes before a timer
recording is set to begin. Press the CLEAR button to
remove the message, then turn off the VCR.
Cassette type/Playback Time
Tape Speed T160 T120 T60
SP
(standard play)
2 hrs.
2 hrs. 1 hr.
40 mins.
LP (long play) 5 hrs.
4 hrs. 2 hrs.
(playback only) 20 mins.
SLP (super long play)
8 hrs. 6 hrs. 3 hrs.
Tape Speeds
This chart shows the recording/playback time for
three types of video cassettes (T160, T120, and
T60). There are three playback speeds: SP, LP,
and SLP. When recording, you can change the
tape speed (SP or SLP) using the SPEED button.
You cannot record in LP speed. You can play a
tape only in the speed in which you recorded it.
Turn off the VCR
for the recording.
Insert a tape in
the VCR.
Leave the Cable
Box/DBS on
(if applicable).
11
9
10
8
mvr630mg.QX33 2/11/02 12:05 PM Page 30