Filter
Top Products
28
SOUND MENU SECTION
Highlight the option you want to alter using the and
buttons. When you have fi nished making the changes you want,
leave the menu system by pressing or .
AUDIO LANGUAGE
The Freesat channels can broadcast in a number of languages. The
Plaza HD•S2 is set to the English, but you can change this setting
by pressing
to show the audio language menu.
Use and to move the orange highlight bar to the language
you want for the soundtrack and press
.
DOLBY DIGITAL
Press
to switch on the Dolby Digital surround sound output
from the S/PDIF and HDMI sockets, for all programmes that
provide it (channels with Dolby Digital sound available show the
symbol in the information bar). Switch off Dolby Digital by
pressing
again. Only turn this on if you have connected your
Plaza HD•S2 to a product that supports Dolby Digital.
Warning! If you switch Dolby Digital on and your TV or sound system
does not support it, you will not hear any audio on HD channels.
LIP-SYNC DELAY
If you are using the S/PDIF output with a sound system and fi nd
the sound and picture falling out of sync, you can delay the sound
output by a small amount to compensate.
Press
to show the lip-sync delay menu on top of the normal
TV picture, then use the
and buttons to adjust the amount
of audio delay in 10ms steps from 0-250ms. Press
to confi rm
your choice and return to the sound menu.
HINT: The volume level of Dolby Digital is fi xed, therefore
you cannot use the volume control buttons when you
watch programming with Dolby Digital.