Filter
Top Products
29
BALANCE
You can alter the volume balance between the left and right stereo
sound outputs by pressing
to show the balance menu and using
the
or buttons to alter the balance in favour of the right side
(positive) or left side (negative). Press
to confirm the setting.
TIME MENU SECTION
Highlight the option you want to alter using the and
buttons. When you have finished making the changes you want,
leave the menu system by pressing or .
AUTO STANDBY
To conserve power, the Plaza HD•S2 will switch to standby after
three hours if no buttons are pressed on the remote control or
front panel. The Auto standby function is normally turned on, and
can be turn off by pressing the button.
SLEEP TIMER
Press
to show the sleep timer menu and use the and buttons
to choose a time up to 90 minutes after which the receiver automatically
switches itself to standby. Press
to confirm your choice.
AUTO TURN ON
You can set the Plaza HD•S2 to switch on automatically at a
particular time. Press
to show the auto turn on menu and use
the
or buttons to set the timer to turn the receiver on once,
every day, each week, on weekdays, weekends, or particular days
of the week. Then use the
and buttons, along with the ,
and the number buttons to set the switch-on time, the channel
source (freesat TV or radio), the channel number and the sound
volume. Press
to confirm.
AUTO TURN OFF
You can set the receiver to switch off automatically at a particular
time. Press
to show the auto turn off menu and use the
or
buttons to set the timer to turn the receiver off once, every
day, each week, on weekdays, weekends, or particular days of the
week. Then use the
and buttons, along with the , and
number buttons to set the switch-off time. Press
to confirm.