Marantz DV4300 DVD Player User Manual


 
ENGLISH
12
Rear Panel
VIDEO
VIDEO
S-VIDEO
S-VIDEO
COMPONENT
COMPONENT
Y
C
B
/
P
B
C
R
/
P
R
R
L
DIGITAL OUTPUT
DIGITAL OUTPUT
COAXIAL
COAXIAL
OPTICAL
OPTICAL
REMOTE CONTROL
AUDIO
OUTPUT
OUTPUT
VIDEO
OUTPUT
OUTPUT
OUTIN
INTERNAL
INTERNAL
EXTERNAL
SERIAL NO.
zxc v b n
m,.
z DIGITAL OUT (OPTICAL)
Connects digital audio under play mode into an AV amplifier or
a receiver equipped with digital audio decoder for you to enjoy
the theatre-quality sound in your home.
Note
Remove the dust protection cap from the optical digital audio output
connector and connect the cable firmly so that the configurations of
both the cable and connector match.
Do not connect to the digital audio input of an amplifier that does
not have Dolby Digital and dts decoder when you set the digital out
option of setup information to BITSTREAM.
x DIGITAL OUT (COAXIAL)
Connects digital audio under play mode into an AV amplifier or
a receiver equipped with digital audio decoder for you to enjoy
the theatre-quality sound in your home.
c AUDIO OUT
Analogue 2 channel (L/R) audio output in order to connect to a
TV or stereo amplifier.
v VIDEO OUT
Connects composite video signal to Composite Video input con-
nector of TV or monitor to achieve high fidelity colour reproduc-
tion.
b COMPONENT VIDEO OUT (480i or 480p)
Connects component video signal to component video input
connector on TV, if your TV supports interlace video input (480i)
or Progressive video input (480p).
n AC in power cord connection terminal
Creates POWER between wall outlet and the unit.
m S-VIDEO OUT
Connects to TV or monitor equipped with S-VIDEO input. In
order to achieve a sharper and cleaner picture than that when
connected via VIDEO OUT (composite video).
, System Control in / out jack
Connect this DVD player to another Marantz Component, to
operate the components as a single system (page 9).
. System Control external / internal switch
When using this DVD player independently, set this switch to
INTERNAL (page 9).