Filter
Top Products
ENGLISH
19
Selecting MENU ITEMS (DVD or Video CD with PBC only)
MENU screen is displayed on DVD disc with MENU data or VIDEO CD with PBC Junction.
1. Selecting 3rd menu item when DVD menu screen appears as shown below
Ex1) Press the numeric 3 button on remote controller and then press ENT (ER) button
Ex2) Press DOWN button twice to highlight the 3rd menu item then press ENT (ER) button
2. Selecting the 3rd menu item when Video CD menu screen appears as shown below
Ex) Press the numeric 3 button on remote controller and then press SELECT button
Select using numeric button Select using arrow button
:
TC
03
ELES
Navigation
Test (2)
3
Navigation
Test (2)
3
P
RESTOP
2. Removing DISC from the disc tray
Press OPEN/CLOSE button to open disc tray. When the disc tray is opened, take out the disc from the tray.
3. Press POWER button
When POWER is pressed, disc tray is closed and POWER is into STAND BY mode and STAND BY indicator turns on.
If power is stand by, after pressing POWER button during PLAY or PRESTOP state, play is resumed from the point where it was
stopped. It is called RESUME function. If you switch OFF by disconnecting AC cord, the machine will start playing from the first track
or chapter.
DVD PRESTOP VCD STOP
STOP
STOP and POWER OFF
1. Stop playing
Press the STOP button during play mode. If a DVD disc is playing, PRESTOP OSD is displayed when you press the STOP button
once showing time information and the play mark (
) will be blinking on the Fluorescent Display instead of the STOP message.
This state is called PRESTOP. If you press PLAY in a PRESTOP state, the picture is played from the point you previously
stopped.
VIDEO
Main
1.Audio and Video Synchronization
2.
Still Pictures
3.
Play Item Connectivity
4.
Selection List and Play List
5.
CD-DA
6.
End
Menu
CD Ver.2.0 Test Disc
03