Filter
Top Products
–
19
–
EN
English
You may determine the order in which tracks will play.
In stop mode, press the MODE
button.
• The PROGRAM screen will
appear.
Press the Cursor buttons
(▲ or ▼) to select a track, then
press the ENTER button.
• Press the CLEAR button to erase the most recently
entered track.
Press the PLAY button to play the programmed
tracks.
NOTES:
• Press the STOP button once and then the PLAY button
again, playback will restart from the point where the
STOP button was pressed. (Program continued.)
• Press the STOP button twice and then the PLAY but-
ton again, playback will restart from the first track in the
usual way. Your program will be saved until either the
disc tray is open or power is turned off.
• Up to 99 tracks can be set in a program.
•To erase all the programmed tracks at once, select ALL
CLEAR at the bottom of the list at step .
•To repeat the current track in the program, press the
REPEAT button repeatedly until TRACK appears
during playback. To repeat the entire program press the
REPEAT button repeatedly until ALL appears dur-
ing playback.
• Refer to page 22 for “Program Playback” of MP3,
WMA, and JPEG.
• If eight or more tracks were in a program, use the
SKIP
button
HH
or
GG
to see all the tracks.
2
3
2
1
SUPER
AUDIO CD
CD
A-B REPEAT
Press the A-B REPEAT button
at your chosen starting point.
• A- appears briefly on the TV
screen.
Press the A-B REPEAT button
again at your chosen end point.
• A-B appears briefly on the
TV screen, and the repeat
sequence begins.
To exit the sequence, press the
A-B REPEAT button.
NOTES:
• The A-B Repeat section can only be set within the cur-
rent title (for DVDs), or current track (for Audio CDs,
Video CDs).
• A-B Repeat is not available with some scenes in DVD.
•To cancel the A point which was set, press the CLEAR
button.
• A-B Repeat playback does not function during title,
chapter, track or all repeat playback.
3
2
1
SUPER
AUDIO CD
CDVCDDVD-RWDVD-VDVD-A
PLAYING A DISC
A -
A - B
OFF
PROGRAM
ENTER
PLAY
CLEAR
TOTAL
CD-DA
1 3:30
1 3:30
2 4:30
3 5:00
4 3:10
5 5:10
6 1:30
7 2:30
To activate the repeat function, press the REPEAT button
during playback.
• The repeat mode changes as described below every time
you press the button.
SUPER
AUDIO CD
CDVCD
REPEAT TRACK / GROUP / ALL
NOTES:
• The Repeat Title/Chapter setting will be cleared when
moving to other title or chapter.
• Repeat playback does not function during A-B repeat
playback.
• Repeat Title/Chapter is not available with some scenes.
NOTES:
• The Repeat Track setting will be cleared when moving
to other track.
• Repeat playback does not function during A-B repeat
playback.
• Repeat playback is not available when playing the
Video CD with PBC function.
WMAJPEGMP3DVD-A
TRACK ALLOFF
(current track repeat) (entire disc repeat)
(repeat off)
TRACK ALL
OFF
(current track
repeat)
(entire disc
repeat)
(repeat off)
GROUP
(current folder
repeat)
NOTE:
• The Repeat Track/Group setting will be cleared when
moving to other Track or Group.
CHAPTER
TITLE
OFF
(current chapter repeat)
(current title repeat)
(repeat off)
ALL
(entire disc repeat)
DVD-RW
In stop mode, press the MODE
button repeatedly until the
PROGRAM screen appears.
Press the Cursor buttons (▲ or
▼) to select a group, then press
the ENTER button.
• The track selection screen will be
displayed.
• It takes approximately 5 seconds until the track selec-
tion screen appears.
Press the Cursor buttons (▲ or ▼) to select a
track, then press the ENTER button.
• Press the s button to go back to the group selection
screen from the track selection screen.
Press the PLAY button to play the programmed
tracks.
NOTES:
• It may take time for all the respective track times to be
displayed.
• The programmed content is retained until the power is
turned off or the disc tray is opened.
• If eight or more tracks have been set in a program, the
user can switch the right part of the screen with the
SKIP button H or G.
4
3
2
1
DVD-A
PROGRAM
ENTER
PLAY
CLEAR
0:00:00
ALL CLEAR
Program Playback
(CD/Super Audio CD/DVD-Audio)
E59M5UD.qx3 04.7.16 7:50 PM Page 19