Filter
Top Products
–
27
–
EN
English
SPEAKER SIZE
• Press the Cursor buttons (K or
L) to select the speaker to set.
• Press Enter until the desired
speaker size appears.
FRONT(L/R), CENTER, SURROUND(L/R)
(Default: LARGE)
LARGE: Select this when the connected speaker is capable
of playing back sounds of 100Hz or less.
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or less.
OFF: Select this when it is not connected. (It cannot be
set OFF on the FRONT speaker.)
SUB WOOFER (Default: ON)
ON: Select this when SUB WOOFER is connected.
OFF: Select this when it is not connected.
NOTES:
• “OFF” is not available for SUB WOOFER when
“SMALL” is selected for FRONT(L/R).
•“SMALL” is not available for FRONT(L/R) when “OFF”
is selected for SUB WOOFER.
• When in playback of DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
• During DVD-Audio playback, the Low Pass Filter
(which filters out the sound with the sound wave fre-
quency over 100Hz) of the SUB WOOFER will be
turned off with the following speaker setting. Otherwise,
the Low Pass Filter will be turned on.
FRONT(L/R): LARGE
CENTER: LARGE
SUB WOOFER: ON
SURROUND(L/R): LARGE
DELAY TIME
To enjoy 5.1-channel surround sound, the distance between
the listening position and all speakers (excluding the Sub
woofers) should ideally be set at a uniform distance on a cir-
cle. If the speakers cannot be set at this manner, the ideal lis-
tening position can be virtually created
with the delay time setting.
Use the Cursor buttons (
K or L) to
select the setting item, then press the
ENTER button.
• Press the Cursor buttons (K or
L) to select the speaker to set,
then press the ENTER button.
DISTANCE (Default : FEET)
METERS(when the ENTER button is pressed):
The unit of distance is set to meters (“m”).
FEET(when the ENTER button is pressed):
The unit of distance is
set to feet (“ft”).
FRONT(L/R), CENTER, SUR-
ROUND(L/R)
(Default : 10ft)
FRONT(L/R):
The distance can be set within the
range of 0 to 60 feet.
CENTER, SURROUND:
These are depends on the setting
value of FRONT(L/R).
NOTES:
• It is not possible to adjust this item if CENTER and
SURROUND have been set to OFF in the SPEAKER
SIZE setting.
• When DEFAULT is selected and the ENTER button is
pressed, all the items are restored to their factory
default settings.
Choose the appropriate Audio settings for your equipment as it
only affect during the playback of DVD discs of the DVD play-
er.
Press the SETUP button in stop mode.
Press the Cursor buttons ( s or B ) to select
CUSTOM, then press the ENTER button.
• CUSTOM mode will appear.
Press the Cursor buttons ( s
or B ) to select AUDIO, then
the ENTER button to confirm.
Press the Cursor buttons ( K
or L ) button to select the
below items, then press the
ENTER button.
DRC (Dynamic Range Control)
(Default : ON)
•To compress the range of sound
volume.
• DRC function is available only on
the discs that are recorded in the
Dolby Digital format.
DOWN SAMPLING
(Default : ON)
• Set to ON when outputting in
48kHz.
• This function is available only on
digital outputting of a disc record-
ed in 96 kHz.
When playing disc with copyright protection
• The sound will be down sampled at 48 kHz, even if you
set to OFF.
DOLBY DIGITAL
(Default : ON)
Set to ON when the player is con-
nected to Dolby Digital decoder.
ON: Output by Dolby Digital.
OFF: Convert the Dolby Digital
to PCM.
DTS (Default : PCM)
DTS: Output by DTS sound
Set to DTS when the unit is
connected to DTS decoder.
PCM: Convert the DTS sound
to PCM.
Press the SETUP button to exit.
5
QUICK
QUICK
4
3
2
1
DVD SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ANALOG
ON
ON
ON
PCM
2.0 CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ANALOG
ON
ON
ON
PCM
2.0 CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ANALOG
ON
ON
ON
PCM
2.0 CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ANALOG
ON
ON
ON
PCM
2.0 CH
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ANALOG
ON
ON
ON
PCM
2.0 CH
Audio Setting
When 5.1CH is selected for analog out, some speaker settings
will be required.
Press the Cursor buttons (K
or L) to select 5.1CH, then
press the ENTER button.
Press the Cursor buttons (K
or L) to select the below
items, then press the ENTER
button.
2
1
AUDIO
5.1 CH
SPEAKER SIZE
DELAY TIME
BALANCE
AUDIO
FRONT (L/R)
CENTER
SUB WOOFER
SURROUND (L/R)
SPEAKER SIZE
LARGE
LARGE
ON
LARGE
AUDIO
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
DELAY TIME
FEET
10ft
10ft
10ft
ON
Speaker Setting
AUDIO
11ft
10ft
9ft
8ft
7ft
6ft
5ft
FRONT(L/R)
AUDIO
DISTANCE
FRONT(L/R)
CENTER
SURROUND
DEFAULT
DELAY TIME
FEET
10ft
10ft
10ft
ON
ANALOG
(Default : 2.0 CH)
2.0 CH: Output 2ch sound
5.1 CH: Output Multi channel sound
AUDIO
ANALOG
AUDIO
ON
ON
ON
PCM
2.0 CH
DRC
DOWN SAMPLING
DOLBY DIGITAL
DTS
ANALOG
2.0 CH
5.1 CH
E59M5UD.qx3 04.7.16 7:50 PM Page 27