Marantz PD4220V Flat Panel Television User Manual


 
20
Changing the Gamma Curve
This feature adjusts the brightness of the midtone areas
while keeping shadows and highlights unchanged.
Example: Setting 3
Set ADVANCED OSM to ON in the MAIN MENU
(1/2), then perform the following operations.
1. On the MAIN MENU, select PICTURE, then press
the MENU/ENTER button.
The PICTURE screen appears.
2. Use the and buttons to select GAMMA.
3. Use the
and
buttons to select 3.
The mode switches as follows each time the
or
button is pressed:
1 2 3 4
PICTURE
2 / 2
EXIT
PREVIOUS PAGE
COLOR TEMP.
GAMMA
LOW TONE
COLOR TUNE
: MID
: 3
: AUTO
SEL.
RETURN
ADJ.
Information
GAMMA settings
The picture becomes darker as the number increases
(in the sequence of 1, 2, 3, 4).
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory defaults.
Making the Low Tone adjustments
This feature allows more detailed tone to be reproduced
especially in the dark area.
Example: Setting 2
Set ADVANCED OSM to ON in the MAIN MENU
(1/2), then perform the following operations.
1. On the MAIN MENU, select PICTURE, then press
the MENU/ENTER button.
The PICTURE screen appears.
2. Use the and buttons to select LOW TONE.
3. Use the
and
buttons to select 2.
The mode switches as follows each time the
or
button is pressed:
AUTO 1 2 3
PICTURE
2 / 2
EXIT
PREVIOUS PAGE
COLOR TEMP.
GAMMA
LOW TONE
COLOR TUNE
: MID
: 2
: 2
SEL.
RETURN
ADJ.
Information
LOW TONE settings
AUTO .......Will automatically appraise the picture and
make adjustments.
1 ...............Will apply the dither method suitable for
still pictures.
2 ...............Will apply the dither method suitable for
motion pictures.
3 ...............Will apply the error diffusion method.
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory defaults.
6. Adjust the white balance using the
and
buttons.
GAIN RED
* If neither the
or
button is pressed within 5 seconds,
the current setting is set and the previous screen reappears.
Information
Adjusting the white balance
GAIN R/G/B ..... White balance adjustment for signal
level
BIAS R/G/B .....White balance adjustment for black
level
RESET ............ Resets settings to the factory default
values. Use
and
buttons to select
ON, then press the MENU/ENTER
button.
Restoring the factory default settings
Select RESET under the WHITE BALANCE menu.