Marantz PD4220V Flat Panel Television User Manual


 
31
Setting the picture size for RGB input signals
Use this procedure to switch the setting to ON or OFF.
Example: Setting the PICTURE SIZE mode to
OFF
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION2, then press
the MENU/ENTER button.
The OPTION2 screen appears.
2. Use the and buttons to select PICTURE SIZE.
3. To set PICTURE SIZE mode to OFF...
Use the
and
buttons to select OFF.
The mode switches as follows each time the
or
button is pressed:
ON OFF
OPTION2
2 / 3
EXIT
PREVIOUS PAGE
POWER MGT.
CINEMA MODE
LONG LIFE
GRAY LEVEL
S1/S2
PICTURE SIZE
DVI SET UP
NEXT PAGE
: OFF
: ON
: 3
: OFF
:
OFF
SEL.
RETURN
ADJ.
Information
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Setting the signal and black level for DVI
signal
Choose the signal for the DVI connector (PC or STB/
DVD) and set the black level.
Example: Setting the PLUG/PLAY mode to STB/
DVD
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION2, then press
the MENU/ENTER button.
The OPTION2 screen appears.
2. Use the and buttons to select DVI SET UP,
then press the MENU/ENTER button.
The DVI SET UP screen appears.
3. To set PLUG/PLAY mode to STB/DVD...
Use the
and
buttons to select STB/DVD.
The mode switches as follows each time the
or
button is pressed:
PLUG/PLAY:
PC STB/DVD
BLACK LEVEL: LOW HIGH
DVI SET UP
EXIT
PLUG/PLAY
BLACK LEVEL
: STB/DVD
: HIGH
SEL.
RETURN
ADJ.
Information
PLUG/PLAY settings
PC ..............When connected to the PC signal.
BLACK LEVEL is set to LOW
automatically.
STB/DVD ...When connected to the SET TOP BOX,
DVD etc.
BLACK LEVEL is set to HIGH
automatically.
BLACK LEVEL settings
LOW ........... When connected to the PC signal.
HIGH ..........When connected to the SET TOP BOX,
DVD etc. Change HIGH into OFF
if the black level appears gray.
Information
S1/S2 settings
AUTO .....Adjusts the screen size automatically
according to the S1/S2 video signal.
OFF ....... Turns the S1/S2 function off.
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.