Marantz PD4220V Flat Panel Television User Manual


 
29
Setting the time for INVERSE/WHITE
Set a time duration.
Example: Setting to that the INVERSE mode starts
in 2 hours and proceeds for one hour and a half.
Perform Steps 1-3 of INVERSE, then...
4. Use the
and
buttons to select ON, then press the
MENU/ENTER button.
THE INVERSE/WHITE screen appears.
5. Adjust the time using the ▲▼
and
buttons.
The mode switches as follows each time the
or
button is pressed:
WORKING TIME
ON 00H03M 00H06M ..... 12H42M 12H45M
WAITING TIME
00H03M 00H06M 00H09M ... 12H42M 12H45M
INVERSE/WHITE
EXIT
WORKING TIME
WAITING TIME
: 01H30M
: 02H00M
SEL.
RETURN
ADJ.
Information
Setting the time
WORKING TIME .....
Set the time duration for
INVERSE/WHITE.
When the WORKING TIME is set
to ON the mode will stay on.
WAITING TIME
...... Set the standby time until the
INVERSE/WHITE mode starts.
* The WAITING TIME can not be set when the
WORKING TIME is ON.
* THE WORKING TIME and WAITING TIME can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
* Ending a WORKING TIME function, the monitor will
be STAND BY.
[Example]
WORKING TIME: 01H30M
WAITING TIME: 02H00M
To select “ON” for the “WORKING TIME”...
Set the hours of the working time to 0H and the minutes
to 0M. ON will be displayed.
SCREEN WIPER
When this is set to ON, a white vertical bar moves
repeatedly from the left and of the screen to the right end
at a constant speed.
Example: Setting SCREEN WIPER to ON
Perform Steps 1-2 of LONG LIFE, then...
3. Use the and buttons to select SCREEN WIPER.
4. Use the
and
buttons to select ON.
The mode switches as follows each time the
or
button is pressed:
OFF ON
LONG LIFE
EXIT
PLE
ORBITER
INVERSE
SCREEN WIPER
SOFT FOCUS
: AUTO
: OFF
: OFF
: ON
: OFF
SEL.
RETURN
ADJ.
Information
SCREEN WIPER
ON ......... The white vertical bar appears.
You can set the time by pressing the MENU/
ENTER button while ON is set.
OFF ....... Screen wiper mode does not function.
Setting the time for SCREEN WIPER
Set a time duration and the speed.
Example: Setting to that the SCREEN WIPER mode
starts in 30 minutes and proceeds for one hour and
a half.
Perform Steps 1-3 of SCREEN WIPER, then...
4. Use the
and
buttons to select ON, then press the
MENU/ENTER button.
THE SCREEN WIPER screen appears.
5.
Adjust the time and speed using the ▲▼
and
buttons.
The mode switches as follows each time the
or
button is pressed:
WORKING TIME
ON 00H03M 00H06M ..... 12H42M 12H45M
WAITING TIME
00H03M 00H06M 00H09M ... 12H42M 12H45M
SPEED
1 2 3 4 5
SCREEN WIPER
EXIT
WORKING TIME
WAITING TIME
SPEED
: 01H30M
: 00H30M
: 3
SEL.
RETURN
ADJ.
←−−−− 2 H −−−−→←−− 1.5 H −−→←−−−−
Start INVERSE/WHITE Start STAND BY