Marantz PD4220V Flat Panel Television User Manual


 
33
FUNCTION ............. Set the LONG LIFE function.
To reset the program
Align the cursor with the DATE field that you wish to
reset, then press the CLEAR button.
To reset the data
Align the cursor with the field (ON/OFF/INPUT/
FUNCTION) that you wish to reset, then press the
CLEAR button.
Special characters in the PROGRAM TIMER
screen
PROGRAM TIMER
EXIT
DATE
MON
TUE
SAT
*FRI
SAT
*
SEL.
RETURN
ADJ.ZOOM
ON
08 : 30
- - : - -
08 : 30
08 : 30
- - : - -
08 : 30
15 : 30
OFF
10 : 30
18 : 15
12 : 15
10 : 00
- - : - -
12 : 15
16 : 00
INPUT
RGB2
VIDEO1
HD/DVD1
VIDEO1
RGB1
FUNCTION
INVERSE
WHITE
WHITE
An asterisk * in the DATE field
An asterisk * means every. For example, *FRI
means every Friday and * means everyday.
A hyphen - in the ON field or OFF field
If any hyphen remains in the ON field or OFF field, the
FUNCTION can not be set.
A hyphen - in the FUNCTION field
A hyphen - means last mode (the mode that was last
selected at the time the power was switched off).
Setting the power on mode
This function sets the input mode at the time the power is
switched on.
Example: Setting VIDEO2
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION3, then press
the MENU/ENTER button.
The OPTION3 screen appears.
2. Use the and buttons to select PWR. ON MODE.
3. To set the PWR. ON MODE to VIDEO2...
Use the
and
buttons to select VIDEO2.
The mode switches as follows each time the
or
button is pressed:
The available inputs depend on the setting of BNC
INPUT.
RGB:
COMP:
OPTION3
3 / 3
EXIT
PREVIOUS PAGE
TIMER
PWR. ON MODE
CONTROL LOCK
IR REMOTE
LOOP OUT
ID NUMBER
VIDEO WALL
: VIDEO2
: OFF
: ON
: OFF
: ALL
SEL.
RETURN
ADJ.
LAST VIDEO1 VIDEO2 VIDEO3
RGB3 RGB2 RGB1 HD/DVD1
LAST VIDEO1 VIDEO2 VIDEO3
RGB3 RGB1 HD/DVD2 HD/DVD1
PROGRAM TIMER
This sets the day and time at which the power will be
switched ON/OFF as well as the input mode.
Example: Setting so that the power will be switched
on at 8:30 A.M., Monday, displaying RGB2 source,
and switched off at 10:30 A.M.
Perform Steps 1-2 of TIMER, then...
3. Use the and buttons to select PROGRAM.
TIMER
EXIT
PRESENT TIME
PROGRAM : OFF
SEL.
RETURN
ADJ.
4. Use the
and
buttons to select ON, then press the
MENU/ENTER button.
The PROGRAM TIMER screen appears.
5. Adjust using the ▲▼
and
buttons and ZOOM ם/
מ button.
PROGRAM TIMER
EXIT
DATE
MON
SEL.
RETURN
ADJ.ZOOM
ON
08 : 30
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
OFF
10 : 30
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
- - : - -
INPUT
RGB2
FUNCTION
INVERSE
The mode switches as follows each time the ZOOM
ם/מ button is pressed:
Date
SUN MON ... SAT * *SUN *MON ... *SAT
ON/OFF Hour
00 01 02 ..... 21 22 23
Minute
00 01 02 ..... 57 58 59
INPUT
LAST VIDEO1 VIDEO2 VIDEO3 HD/DVD1
RGB3 RGB2 RGB1 HD/DVD2
FUNCTION
ORBITER INVERSE WHITE WIPER
Information
PROGRAM TIMER settings
DATE ....................... Set the day of the week (e.g.
Sunday).
ON (hour, minutes)
.... Set the time at which the power
will be turned on in the 24-hour
format.
OFF (hour, minutes)
... Set the time at which the power
will be turned off in the 24-hour
format.
INPUT ..................... Set the input mode that will be
displayed when the timer is on.