Marantz PD4220V Flat Panel Television User Manual


 
36
Video Wall setting
Use this feature to configure a 2×2 or 3×3 video wall.
Set ADVANCED OSM to ON in the main menu (1/
2), then perform the following operations.
1. On the MAIN MENU, select OPTION3, then press
the MENU/ENTER button.
The OPTION3 screen appears.
2. Use the and buttons to select VIDEO WALL,
then press the MENU/ENTER button.
The VIDEO WALL screen appears.
VIDEO WALL
EXIT
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
: 1
: SPLIT
: OFF
: OFF
: OFF
: OFF
SEL.
RETURN
ADJ.
3. Set the VIDEO WALL using ▲▼
and
buttons.
See page 36 to set DIVIDER.
See page 36 to set POSITION.
See page 37 to set DISP. MODE.
See page 37 to set AUTO ID.
See page 37 to set IMAGE ADJUST.
See page 38 to set P. ON DELAY.
See page 38 to set PLE LINK.
See page 39 to set REPEAT TIMER.
4. Once the setting is completed...
Press the EXIT button to return to the OPTION3 menu.
Note:
A contingency method of shutting off the electric
power should be used in cases of emergency during video
wall setup.
Information
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
DIVIDER
Set the 2×2 or 3×3 video wall.
Example: Setting 4
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select DIVIDER.
4. Use the
and
buttons to select 4.
The mode switches as follows each time the
or
button is pressed:
OFF 1 4 9
VIDEO WALL
EXIT
DIVIDER
POSITION
DISP. MODE
AUTO ID
IMAGE ADJUST
P. ON DELAY
PLE LINK
REPEAT TIMER
: 4
: SPLIT
: OFF
: OFF
: OFF
: OFF
SEL.
RETURN
ADJ.
Information
DIVIDER settings
OFF, 1 .......1 Screen (Matrix display function does not
work)
4 ................4 Screens (2×2 video wall)
9 ................9 Screens (3×3 video wall)
* When you select 4 or 9, set the VIDEO WALL
POSITION.
VIDEO WALL POSITION
Set the position of each display.
Example: Setting 4
Perform Steps 1-2 of VIDEO WALL, then...
3. Use the and buttons to select POSITION, then
press the MENU/ENTER button.
The VIDEO WALL POSITION screen appears.
4. Use the
and
buttons to select NO. 4.
The mode switches as follows each time the
or
button is pressed:
4 Screens
NO. 1 NO. 2 NO. 3 NO. 4
9 Screens
NO. 7 NO. 8 ....... NO. 14 NO. 15
VIDEO WALL POSITION
POSITION NO.
4
EXIT
RETURN
ADJ.
Information
VIDEO WALL POSITION settings
1 Screen.....There is no need to set POSITION.
4 Screens
9 Screens
NO. 1
NO. 2
NO. 4
NO. 3
NO. 7
NO. 8
NO. 9
NO. 10
NO. 11
NO. 12
NO. 13
NO. 14
NO. 15