Maxtor AVE MVDR-5000 DVR User Manual


 
45
5.1.4 Connection Testing
With the previous settings, follow the
instructions below to ensure whether you
have established the connection
successfully.
1. Click Start   Command Programs
2. Type in ping 192.168.1.1 then Enter.
(See the sample screen below)
** This IP is the DVR IP address which is
assigned for the connected DVR.
3. If you receive a response as in the
sample screen below, the connection
hasn’t been successfully established.
Please re-check all the hardware and
software installations by repeating steps 1
to 5. If you still can’t establish the
connection after rechecking, please contact
your dealer.
4. If you receive a response as in the
sample screen below, you have
successfully made the connection.