Filter
Top Products
60
9.
Place the mobile rack back onto the device and
screwing in all the
4 screws.
6.2.2 Mobile Rack (FOR REMOVABLE HDD MODEL)
1.
Make sure that the key
is unlocked.
2.
Pull the active-handle
outward to detach the
carrier body from the
mobile rack.
3.
Slide the top cover
backward and remove.
4.
Setting the jumper of
your hard disk driver.
The way to set the
jumper of the drive
varies between
manufacturers; please
refer to the instructions
on the driver to set the
jumpers in the master
position.