Filter
Top Products
ADDING AND SKIPPING CHANNELS
23
After setting channels into memory, you can add or delete channels as follows:
Make sure the main power switch is on as shown on page
14, then press the POWER button
1 to turn on the TV; the
POWER indicator will light green. Press the TV/VIDEO
button 2 repeatedly to select the TV mode. Select a
channel to delete using the Direct Channel
Selection/Number (0-9) buttons 3.
1
Press the ENTER/MENU button 1; the Video Menu screen
will appear. Press the CHANNEL/Navigation UP
2 or
DOWN
3 button to select TV SETUP, then press the
ENTER/MENU button
1 to select it.
2
2
3
1
Press the CHANNEL/Navigation UP 1 or DOWN 2 button
until ADD/ERASE is selected. Select ADD or ERASE using
the VOLUME UP/Navigation Right 3 or VOLUME
DOWN/Navigation Left 4 button. Press the
FREEZE/EXIT
MENU button 5 to confirm and exit the menu. If ERASE is
selected, the channel will be skipped when using the
CHANNEL/Navigation UP 1 or DOWN 2 button.
3
NOTE: The adding and skipping channels function : If the channel is erased, you cannot use the Channel/Navigation UP or
Down button to select that channel. You only can use the Direct Channel Selection/ Number (0-9) buttons to select that
channel. Add the channel again so you can select that channel using the Channel/Navigation UP or Down button.