Filter
Top Products
TV OPERATION (CONTINUED)
25
MUTE CHANNEL RETURN
Repeatedly press this button to cycle through the device(s)
connected to the INPUT jacks (TV/CATV, AV, SV (S-Video),
YPbPr and PC).
NOTE:
• For PC mode, if “PC No Signal” appears on the
screen, please refer to “
COMPUTER CONNECTION”
(see page 13).
1
TV/VIDEO
Press to select one of the following sound modes:
STEREO: Select for channels that are broadcasting in stereo.
MONO: Select for channels broadcasting in mono or if you are
having difficulty receiving a stereo signal.
SAP (Second Audio Program): Select to listen to a Separate
Audio Program which is usually a foreign language translation.
NOTES:
• MTS is for TV mode only; you can only set for the MTS while
in the TV mode.
• MTS can support STEREO (First Audio program) and SAP
(Second Audio Program).
• If the TV channel is broadcasting in stereo and the reception is
strong enough, “MONO” will change to “STEREO”
automatically. You cannot select between “MONO” and
“STEREO” in MTS setting.
1
MTS
Repeatedly press the EQ button to select the desired EQ
setting ( USER,
POP
, CLASSIC, VOICE, JAZZ, FLA
T).
Wait 10 seconds and the text will disappear.
1
EQ
Press the SLEEP
button to set the sleep time between 5
and 120 minutes (i.e. Sleep OFF–the sleep timer will be of
f,
Sleep 5–the unit will automatically turn off after 5 minutes,
Sleep 15–the unit will automatically turn of
f after 15
minutes, etc.).
1
SLEEP TIMER
Press the MUTE button to turn off the sound. The TV’s
sound will be silenced and “MUTE” will appear on the
screen. The sound can be turned back on by pressing this
button again; “MUTE” will disappear from the screen.
1
Press the CHRTN button to go back to the previous
channel selected. Press the CHRTN button again to return
to the channel you were watching.
1