Filter
Top Products
11
CONNECTION TO OUTPUT DVD (CONTINUED)
CONNECTING THE UNIT TO A TV USING THE Y, Pb/Cb, Pr/Cr JACKS
PROGRESSIVE (Y, PB, PR) VIDEO OUT:
Use these jacks to connect to a TV with progressive video input jacks, then set the PROGRESSIVE SCAN switch to ON.
Progressive Scan is a video scanning system that displays all lines in a frame in one pass, as opposed to the traditional
system, interlaced scan. This connection provides optimum quality. To ensure maximum picture quality, use three video-
grade cables for connections. Note that it is essential to match the color-coded connectors with a compatible TV.
525 LINE DIGITAL PROGRESSIVE-SCAN COMPONENT VIDEO OUTPUT
Compared to standard interlaced video, Progressive Scan ef
fectively doubles the amount of video information fed to your
TV or monitor
.
The result is a stable, flicker-free image. (Check your
TV/monitor for compatibility with this feature.)
For the very highest picture quality, try watching a movie on DVD-Video on a Progressive-Scan compatible TV.
NOTES:
• If you connect a TV that is not compatible with a Progressive Scan signal and set the PROGRESSIVE SCAN switch to
ON, you will not be able to see any picture at all or "PSCAN" will appear on the screen. Slide the PROGRESSIVE
SCAN switch to the OFF position to turn the progressive scan function of
f.
• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SET THE PROGRESSIVE
SCAN SWITCH
T
O OFF
.
• To turn off the Progressive Scan function, turn off the unit as described above and switch the Progressive Scan switch
OFF. The Progressive Scan function will turn off whenever you turn on the player and TV.
NOTES FOR CONNECTING:
• Set the VIDEO OUT Option (on the GENERAL Menu
Page) to YUV if using the Component Video Out jack.
• Your TV must have Y, Pb, Pr or Y, Cb, Cr Input jacks.
• Set the TV’s TV/VIDEO button or switch to the VIDEO
setting.
• When connecting, refer to the owner’s manual of the TV,
as well as this manual.
• When connecting, make sure the power is off and both
units are unplugged before making any connections.
• Component Y, Pb/Cb, Pr/Cr Jacks can only be used for
DVD Playback, not for VCR or TV mode.
• If using a TV with a blue screen option, turn the option off,
on the TV for best results.
If your TV has separate AUDIO IN
jacks for Composite Video and Y,
P
b/Cb, Pr/Cr Inputs, connect to
these jacks.
If your TV has one set of AUDIO IN
jacks for Composite Video and Y,
Pb/Cb, Pr/Cr Inputs, connect to
these jacks.