Filter
Top Products
25
BASIC OPERATION
IMPORTANT:
When “ ” appears while pressing a button, this means that the
corresponding function cannot be performed either on the disc inserted, or
in the selected mode.
Press the MUTE button once to mute the
sound; “MUTE” will appear on the screen.
Press the MUTE button again to restore the
sound; “MUTE OFF” will appear temporarily
on the screen.
1
2
1
Press the P/N button to switch back and
forth between NTSC and PAL. In the USA,
the standard is NTSC.
1
2
1
P/N BUTTON
MUTE BUTTON
For private listening, plug headphones into
one or both of the Headphone jacks. The
speakers will be disconnected when
headphone(s) are connected.
1
1
1
Press the SCREEN MENU button 1 to access the on-
screen picture display menu. Repeatedly press the
SCREEN MENU button
1 to cycle through Brightness
and Color
, then use the +
2 and – 3 buttons
to adjust.
When finished, press the SCREEN MENU button
1
repeatedly until the on-screen picture display menu
disappears to exit.
NOTE: If the SCREEN MENU, + or
– button is not pressed, after 20 seconds, the on-screen
picture display menu will disappear from the screen.
2
1
3
1
HEADPHONE JACK(S)
SCREEN MENU BUTTON
Press to cycle between standard 4:3 size
(TV) and full screen (will fill the LCD
screen).
NOTE: The MODE button is just for
adjusting the built-in screen’s display only,
not for the Video Output.
1
1
1
MODE BUTTON