![](http://pdfasset.owneriq.net/d/0c/d0c29608-25ca-4bf4-a499-f63e4def414f/d0c29608-25ca-4bf4-a499-f63e4def414f-bg23.png)
34
DVD OPERATION (CONTINUED)
During playback of a DVD disc, press the
PROGRAM button; the Program menu will
appear on the TV screen.
3
2
1
Select the first title and chapter to be played back
using the Number buttons to input two numbers for
each program track, one for the title and one for the
chapter. After inputting the two numbers, the cursor
will jump to the next program.
NOTE: For numbers 10-19, press the +10 button
once for the first digit and then enter the second
digit using the Number (0-9) buttons; for 20-29,
press the +10 button twice for the first digit and
then enter the second digit using the Number (0-9)
buttons, etc.
3
2
2
Repeat step 2 until all desired chapters
have been programmed (up to 20).
If you would like to program more than 10
chapters, press the SKIP
n button to go to
the next screen.
3
2
3
Use the Navigation (√,®,π,†) button 1 to
select "Start" at the bottom of the Program
menu; then press the PLAY/ENTER button
2 to begin Programmed playback. Playback
will begin on the first chapter that you
programmed and the player will continue to
play all of the chapters that you
programmed in the order in which you
programmed them.
1
2
4
PROGRAMMED PLAYBACK
The DVD player in this unit has a 20 chapter programmable memory that allows you to
program up to 20 chapters on any disc for playback in any desired order. You may program 20
different chapters or you may also program certain chapters to play more than once. To
perform Programmed Playback, proceed as follows:
TO CANCEL AND STOP THE PROGRAM FUNCTION:
Press the STOP (■) button twice.